U bevindt zich in: Panda Security > IT Security for Business > support > Soporte Productos Panda Security

Wat voor hulp heeft u nodig?
(Bijvoorbeeld:“Panda AdminSecure”, “fout 2093”)
Print

Error 2120 updating the protection of Panda Cloud Office Protection

Informatie van toepassing op:

Products
Panda Cloud Office Protection
Panda Cloud Office Protection Advanced

Symptom

Error 2120 occurs updating the protection of Panda Cloud Office Protection.

Cause

This error occurs because, during the process of updating the protection of Panda Cloud Office Protection, the computer must be restarted but the user has not allowed this.

Solution

Restart the computer and check that after a while, the update finishes correctly.

Data needed to report the incident

If the issue is not solved, it is necessary to collect a series of data from the computer. This information is collected automatically by the PSInfo tool that you need to download and run following these instructions:

  1. From a computer with Internet connection, download the PSInfo2_V2.exe file into your computer and save it in your Windows Desktop.
  2. Double click the PSInfo2_V2.exe file, so that the information about hardware and software from your computer is gathered.
  3. Fill in all the requested fields.
  4. If PCOP is installed in the computer, the PCOPDIAGS application will be launched.
  5. Follow the PCOPDIAGS wizard.
  6. When the data collection finishes, a file called XXXX.psz is generated in your hard drive. Send to Panda Security this file which is located in the TEMP folder of your hard drive, by default.

In the event that for whatever reason PSInfo cannot be run, or the PCOPDIAGS application has not been released, it is necessary to collect and send Panda the following data to study the error:

  1. WalUpg log file (once the error occurs).
    To get it, follow the steps below:
    1. Find the WalUpg.ini file in %Programfiles%\Panda Security\WaAgent\WalUpg
    2. Edit the file and add the following lines:

      [LOG]
      LevelLog=2000
    3. Restart the Panda Endpoint Administration Agent service.

      The WalUpg.log file is saved in the folder %Programfiles%\Panda Security\WaAgent\WalUpg

When the incident occurs again, send the collected data to the Panda Security Tech Support address for analysis.

Artikelnummer- 20130107 502120 EN
survey

Help ons om onze dienstverlening te verbeteren. Geef ons uw mening!

Uw suggesties zullen ons helpen om uw vragen sneller en effectiever te beantwoorden.

Gaf dit artikel het antwoord op uw vraag? JA NEE Hartelijk dank voor uw antwoord

Hoe zou u dit artikel verbeterd willen zien?

Wilt u contact opnemen met onze technische ondersteuning?