To access the configuration console from a computer located in the same network segment as Panda GateDefender Performar, you should use the administration IP address (172.16.1.1 by default). However, this IP address will not be accessible from a computer in a different subnet from the GateDefender.
In order to access the configuration console from a computer in another subnet, you must first configure your network so that there is communication between the PC and the GateDefender administration address. Remember that there must be a route in order to establish communication between the PC that you are working with and the GateDefender unit.
Once the network is configured, you only need to add the additional routes to the target network. To do this:
- Go to the administration console.
- Click on System settings.
- Click on the Network environment and select Additional routing table.
- Enter the additional routes to the target network, indicating the destination, the subset mask and the link ports.
These steps will allow you to access the GateDefender administration console from a specified subnet.