x
48h OFFER
If you're already a customer of
our homeusers protection,
renew now with a 50% off
RENEW NOW
x
SPECIAL OFFER
If you're already a customer of
our homeusers protection,
renew now with a 50% off
RENEW NOW
x
HALLOWEEN OFFER
take advantage of our
terrific discounts
BUY NOW AND GET A 50% OFF
x
CHRISTMAS OFFER
Buy the best antivirus
at the best price
BUY NOW AND GET A 40% OFF
x
SPECIAL OFFER
Buy the best antivirus
at the best price
BUY NOW AND GET A 50% OFF
x
BLACKFRIDAY OFFER
Buy the best antivirus
at the best price
TODAY ONLY UP TO 70% OFF
x
CYBERMONDAY OFFER
Buy the best antivirus
at the best price
(Only for homeusers)
TODAY ONLY UP TO 70% OFF

Technical Support

Need help?

 

How do I configure the SNMP warnings in Panda GateDefender Integra?

Information applies to:

Products
Panda GateDefender Integra 100
Panda GateDefender Integra 300 

Panda GateDefender Integra allows you to configure warnings that will be sent to inform the administrator when certain events occur. The warnings can be sent through the following means:

  • Email
  • SNMP agent
  • Syslog

 

Steps for configuring the SNMP agent warnings

  1. Go to the web administration console.
  2. Click on Warnings in the main menu and select SNMP warnings settings.
  3. To enable the SNMP agent, select the check box.
  4. Enter the description of the agent in the Description field.
  5. Enter the location of the agent in the Location field.
  6. Enter the Contact user.

The Communities section shows the list of communities added. Community is the identifier that allows you to define authentication and access control between an SNMP agent and a management station (server that manages queries and traps). In other words, it is the association between the agent –which responds to queries and generates traps- and the SNMP server that manages them. In this section, you will see a list of the communities added. The following fields appear for each entry:

  • Enabled: Enable the checkbox corresponding to each event to establish whether the community is enabled or disabled.
  • Name: Name of the community
  • Queries: Shows if there are any active queries
  • Traps: Shows if traps are enabled (they log possible events).

    If you want to enter a new community, click on the Add button. If you want to alter the data related to any existing community, select it and click on Modify

    In the Communities screen, you can configure the following parameters of a community:
  • Name: Enter the name of the SNMP community
  • Host: Enter the IP address or the group of IP addresses of the server or servers used to monitor the appliance.

    NOTE: The Panda GateDefender Integra SNMP agent uses the configuration IP address, therefore the server or servers used for managing GateDefender Integra must be placed on the same interface on which the configuration IP address is configured. 
  • The Queries section lets you enable or disable the queries for each protocol. You can also configure the corresponding port.
  • In the Traps section, you can enable the traps for each protocol and configure the port to use to send them.
  • Click on Add to save the changes.

If you have enabled or disabled any community, click on Apply to apply the changes.

After configuring the SNMP agent and the communities, simply select the events to report.

 

Steps for configuring the events to report

  1. Go to the web administration console.
  2. Click on Warnings in the main menu and select Events to report settings.
  3. Select the language in which the notifications will be sent from the Select the language menu.
  4. In the Notifications to administrators section, you can select the events to report using the SNMP agent.
  5. In the SNMP column, select the check boxes for all the events that you want to send using SNMP agents.
  6. Click on OK to save the changes.

NOTE: The SNMP agent IP address to be entered on launching the SNMP manager from the remote computer must be the configuration IP address of the device.

Help nº- 20070702 31486 EN

Have you resolved your query with this article?

yes no

Thanks for your answer


Why didn't you find it helpful?


The instructions are too complex.
The instructions are too long.
The instructions don't work.
I'd rather have a video.
Other reasons.




Talk to a technician!

 

Business hours: Mondays-Fridays 9:00 to 18:00 CET

Outside business hours, please use the online form.





ALWAYS ONLINE TO HELP YOU TWITTER FORUM RATE US CHAT
ALWAYS ONLINE TO HELP YOU TWITTER FORUM RATE US CHAT